- Schumacher CAT L1 1/10th Competition 4WD -

The Schumacher CAT L1 is an all new lightweight, high quality 1/10th 4WD Off Road buggy, developed for top level racing. The CAT L1 is faster, with all new fully adjustable suspension geometry, a lower centre of gravity, and improved efficiency. The CAT L1 has been developed at the highest level of international competition, and is already a proven race winner with Michal Orlowski and Jörn Neumann.

Join the race winning team. #Schumacherfamily and drive a CAT L1.

The CAT L1 a revolution of the breed.

Specification

  • Power Source: ELECTRIC
  • Model Type:4WD, OFF-ROAD, COMPETITION
  • Length: 375mm
  • Wheelbase: 280-286mm
  • Width: 250mm

Equipment Needed
  • 2 Channel Radio
  • Motor
  • Servo
  • Electric Speed Control
  • Tyres
  • Motor Pinion
  • Lipo Battery
  • Paint for Bodyshell

Features

Transmission

  • NEW Alloy chassis side stiffeners.
  • NEW 3 Gear transmission for opposite motor rotation, improves agility and steering on high traction surfaces.
  • NEW Lightweight layshaft and side gears.
  • NEW Small, low rotating mass gear differentials. With 3 position height adjustment, to adjust for driveshaft plunge and mixed track conditions.
  • NEW Durable polyurethane drivebelts.
  • NEW FAB (Front Adjustable Brake System) with larger 22 tooth pulleys included.
  • NEW Low CofG pinned and centre mounted motor mount.
  • NEW Alloy front transmission housings with steering mounting for increased rigidity.
  • NEW Alloy upper front housings with lower CofG.
  • NEW Alloy rear lower transmission housings with improved belt tensioner.
  • NEW Lighter alloy rear upper housings for low CofG.
  • NEW Lightweight, twin pad slipper clutch with Ultra Fine adjustment spring.
  • NEW Strong steel universal driveshafts with 5mm axles.
  • NEW Hard anodised 12mm wheel hex.
  • NEW Larger 5x11x4 layshaft and pulley bearings increase durability and precision.
  • Optional ball diff available.
  • Includes 33 super precision ball bearings.

Chassis

  • NEW Hard anodised 2mm 7075-T6 alloy chassis with 4mm carbon stiffeners.
  • NEW Vertical top decks for increased linear flex.
  • NEW Alloy floating servo mount pinned into the chassis.
  • NEW Adjustable shorty locating system. Enables ultra precise fitment.
  • NEW Multiple Ackerman position alloy centre track rod.
  • Shorty and saddle LiPo compatible.
  • NEW Cable management system for neater wire installs.
  • NEW Lightweight battery posts.
  • NEW Lower, smaller front bumper - housing front roll bar and suspension.
  • NEW Front wing mount.
  • NEW Aerox Body and Schumacher wing.
  • Battery thumb screws.

Suspension

  • NEW Wishbones with new improved geometry.
  • NEW Geometry steering yokes.
  • NEW Rear hub carrier. Featuring new vari-length wishbone and hub geometry.
  • NEW Hub Carriers.
  • NEW Stronger 3.5mm diameter front inboard pins.
  • NEW Front pivot strap inserts for front track width adjustment. And new 8°, 10°, 12° front rake adjustment.
  • NEW Anti Roll bars included with centralising collar.
  • NEW Strong, rigid 4mm carbon fibre shock brackets.
  • NEW Lightweight front shock tower cover to protect your car and the track from damage.
  • NEW Front wheelbase adjustment for improved tuning.

Shocks

  • NEW Big bore shocks with big bore “CORE” springs, titanium nitride shafts, twin o-ring sealing, optimised shock body.
  • NEW Ball mounted two piece shock cap for easier building, maintenance, vented option and lighter weight.
  • NEW Threaded spring collars for better location.
  • Super lightweight design.

Source: