- Team Losi Racing 22 2.0 - Steve - Mid-Motor ESC mount modification -



I took a different approach with my 2.0 I just put together and there is plenty of room for a shorty. I used the RM ESC shelf and and cut off the rearward attachment posts like per the link below.
http://www.petitrc.com/setup/losi/setuptwentytwo/22_RobEngle_MidMotorESCShelfModification/

This modification is even easier with the 2.0 as you don't have to drill any holes in the chassis (item D per the link), they are already there. The holes in the 2.0 chassis do not line up exactly, maybe off by 1mm or so. First you have to put each of the four screws in slightly then tighten them down by alternating which screw is being tightened. Maybe a couple turns then move to the next one until the shelf is tight on the chassis. I used a 1.0 battery brace in front and a single velcro strap. There is a small piece of foam I had to put in front of the battery to push it tight against the rear brace.


Source: