Meduimish bite outdoor large 1/8 size dry dusty hard packed mostly clay track (some sand in it)

This set-up may seem unorthadox, but it works for me.

Aluminum front and rear camber blocks, alum bat tray, All the weight from the TLR weight kit.
62 mounted to back with 7g block on top.
4g blocks each bolted to th erear most chassis holes next to rear arm front pivot mount.
Alum kick up with 25 deg brass kick shim, and another 25 deg brass kick shim on top of servo(not sure of exact weight.
Slim/shorty savox servo.
Tranny raised 1mm.

Front:

Toe: 0Deg
RH: 23mm
Camber: -1.5Deg
Kick: 25Deg
Caster: 5Deg
Oil: 27.5
Piston: 55
Spring: Orange
Spindle: 2mm Trailing... 2mm on top of Caster block (spindle at max height)
Shock Limiters: 3mm Internal
Shock Location: 2-Middle
Bump Steer: 1mm
Camber Link: 1. 2mm spacer inside, 1mm outside

Rear:

Toe: -4.5Deg
Anti-Squat: 1Deg LRC
Ride Hight: 23mm
Camber: -1.5Deg
Rear Hub Spacing: All the way foward
Hex Width: +.75
Oil: 27.5
Piston: 55
Spring: Yellow
Shock Limiters: None-Eyelets NOT unscrewed
Camber Link: 1-D... 2mm spacers inside and outside
22 Wing, No Wickerbill
Batt Position: Forward (Batt tray in 10mm forward position)
4000Mah Shorty Pack

Front tires PL M3 Holeshots firm inserts cut 2/3 width
Rear tires PL M3 Tazers CC inserts