This week, I would like to talk about SLRC (Super Low Roll Center) for the front of your 22 vehicles. This mod is very easy to do, and it helps the front end of the car roll more on higher grip stations giving the car a more forgiving feel and less grip rolling. (See picture below) The front two washers on the front kick shim are standard 1mm ball stud washers; the rear two washers I’ve used are 1mm rear axle spacers. After adding these shims to the kick shim on the car, this lowers the front inner hinge pins by 1mm giving you the SLRC front pivot. Along with this change, I suggest increasing the front spring rate by one, adding 1mm more front stroke, and lowering the inner front ball stud by 1mm.

JR