Silver #70 springs
40 wt AE oil
camber link- outside hole on the inner and outer on hub with 3mm
washer on outer ball stud, 0mm on inner.
diff (not 1-way, not tried that yet but since I'm trying to calm
the front down I probably won't for a while)
hub washers standard.
shock positions- middle on tower and middle on wishbone
kit 1mm anti-roll bar
blue #68 springs
35 wt AE oil
camber link- mid hole on the inner and outer on the hub. 2mm
washer under inner ball sud and 0mm on outer.
long wheel base.
shock positions- middle on tower and inner on wishbone.
kit 1.2mm anti-roll bar
No Dam on wing 7 degrees.
Ride height front shafts just under level and rear shafts level
This set-up was giving me more front end bite than you can imagine,
the car was commented on as "twitchy" by a couple of
people watching it earlier in the day but towards the end was a lot