| For those running turf or carpet, here's some pictures on making a front sway bar setup. I will update it with more photos in the next few hours. I have run bars between 0.8mm and 1.0mm. My current preference is 0.9mm. All Kyosho parts are used to make this. The bar however needs to be hand made or the Associated bar can be used as well. |
 
| The links are made from a shock end and steering ballcup. The total length for the shock end is 13.25mm and the ballcup is 12.0mm. |
| Top view of the webbing removed for a 3 hole front arm along with the webbing removed for the swaybar. Only a minimal amount of material must be removed for the bar. Just enough for the shock eyelet to fit. |
| A view of the link in place |
| The third hole for shock location is the same distance from the first hole to the second. The swaybar hole is basically just eyeballed to be in the middle of the webbing where the link sits. |
  
|
|
|
|
|
|
