- Kyosho Ultima RB5SP2 - Jared Tebo - Reedy Race - West Coast RC - 29-30.01.2011 -

As far as I've been able to figure out, if you want to run Tebo's Reedy 2011 (indoor clay) setup with the same option parts that he uses you will need to add the items below to your RB5 SP2. Let me know if I'm missing anything or got any of these wrong. M. Downey

KYOLAW30 - Alu wheel hubs (x2)
KYOW5303V - Big Bore shocks (front)
KYOW5304V - Big Bore shocks (rear)
KYOXGS001 - Big Bore front springs, PINK
KYOXGS014 - Big Bore rear springs, RED
KYOUM525 - Front shock stay for Big Bores (Note: Tebo no longer uses this. He went back to the stock tower, apparently, because he didn't like the feel of the new one.)
KYOUMW516-0 - Alu rear hubs 0*
KYOUMW511 - Rear Inner Alu suspension holder
KYOUMW512 - Rear Outer Alu suspension holder
KYOUMB01 - Trident body
KYOLA247 - Blast-S wing
KYO97030 - Tungsten Carbide diff balls 3/32" (unless he uses ceramics)
KYOUMW503 - Carbon battery stay
KYOW0146 - Blue Alu flat head washers (Tebo's bling)
KYOUMW507 - RB5 blue axle, used by Tebo as battery posts
KYOW0142 - 3x6x2mm blue aluminum spacers used for bling around gearbox screws.
KYO97038 - Long eyelet shock ends (all around, fully screwed in)
KYO1-s33010ht - M3x10 titanium flat head screws used with blue Alu countersunk washers above in place of stock M3x8 stock screws above chassis to lower CG
KYO1-S33012HT - M3x12 titanium flat head screws (same as above but used in place of M3x10 stock screws)
Lunsford M3x26 titanium flat head screw used with blue Alu countersunk washers above on upper shock mounts (not sure what brand he uses but Lunsford is the only one I can find)
UM524 - Main gear shaft
UM523 - Motor spacer
I can't find any 35mm titanium button head screws to replace the gearbox screws.

(I assume he uses these as well):
KYOUMW509 - SP Milled Aluminum motor plate
UMW513 - SP Idler Gear

Source: