Front:
2C pistons, 40wt losi oil
Yellow #65 Spring
middle hole on tower, outside on arm
no limiters, bottom shock mount unscrewed 3 turns
30* kickup
spindles all the way down in castorblock (washer on top)
2mm ackerman washer
middle camber link hole on bulkhead w/ 2mm washer. inside on
castorblock
23mm ride height
Rear:
2C pistons, 32.5wt losi oil
Blue #68 spring
no limiters
middle hole on tower, outside on arm
hubs in upper hole, middle postion.
0* anti squat
camber link in middle postion on bulkhead w/1mm washer, outside on hub
with 2mm washer
22mm ride height
wing all the way down, 4* angle
Battery back, 1/2oz weight behind
battery, 1/2 oz up front under steering rack.
I had no luck all weekend with
electronics and such, but this setup was very easy to drive, Joe P's was
probably a better setup for my driving style in the long run though.
Just tossing this one out as an option.
|