I went to a hundred entry race this
weekend with several team drivers in attendance. Had some good results
with the car qualifying third and took the win by winning the 1st and
3rd mains. My car was really good so I thought I’d pass along a set
up for slicks on clay.
FRONT
3-B Piston
40 wt Losi
D. Yellow Spring
21 mm shaft length
mid on tower, out on arm
2-B camber link with no washers
-1 camber
30° kick up w/ no spacer
no toe
axle height up
stk bump steer.
REAR
3-B piston
30wt Losi
L. Yellow Spring
29.5 mm shaft length**
Mid on tower, mid on arm with Mid-Rear conversion
2-B camber link with 1mm under the ball stud on the bulk head and 2
mm under the stud on the hub,
-1 camber
2° anti-squat (Stk)
mid wheel base
hinge pin in top hole of hub.
MISC
Battery forward, 6 cell, stock body
New JConcepts 6” HD V-wing with ¼” lip
Ride height 24mm front and 22mm rear
20/78 gearing
¼ oz under steering rack and ½ oz behind battery
**Ran Mid-Rear conversion with the stock shafts and used 777 servo
link ends for the shock eyelets to obtain proper down travel. (just
didn’t have the longer shafts)
TIRES
Front: Panther Bobcat, clay compound,
losi front firm foam
Rear: Panther Switch 2.0, clay compound, trinity bomb 1 foam