Front
Shock tower = 2
Arm = I
Tower link = 1 w/ 3 washers
Hub = B
Height = just below level
Axle height = UP
C-hub = 25 degree
Bump = 2 washers
Toe = 0
1/2 ounce of weight in bulkhead
(Found this after I got home from the race as I checked the
steering bearings)
Shocks
Front = 25wt AE
Springs = Green
Pistons = #2
Limiters = 3 (inside)
Front tires
Proline Edges
AE rims
Rear
Shock tower = 0 << drill
the inner hole
Arm = I
Tower link = 1 w/2 washers
Hub = A
Axles = level
Wheelbase = Long
Anti-squat = 0
Rear = 25wt AE
Springs = Black
Pistons = #1
Limiters = 3 (inside)
Rear tires
Panther Komoto Dragons
AE rims
Motor and ESC
Speed Passion 13.5
Core-RC 3250 lipo
Battery centered one pad front and rear.
Wires towards the rear.
Spur/Pinion = 81/23
Track (Farmers Hobby Tampa, FL USA)
http://farmershobbyshop.com/
Bumpy
Med/high traction
Wet
Red clay
Practice the track was dry and
sandy/dusty (they hadn't prepped the track "watered"
yet) and this setup worked!
The red clay at that track has a
lot of sand in it and there is a lot of loose sand/dust until it's
watered.