- Team Associated B5M - Schelle Racing - Options -


B5 Aluminum Steering Bushing Set - SCH1087

Get your B5 generation buggy and truck dialed in at the track with the new Schelle Aluminum Steering Bushing Set. The 8 piece complete tuning set gives racers the option of all 3 axle height positions and comes inside our mini snap case for storage. The bright machined 7075 finish will be sure to turn some heads in the pits as well as shed some weight by switching material away from steel.

B5 Aluminum Steering Bushing Set features:

  1. Complete tuning set of 8 pcs. Includes Low, Middle (kit), and High axle height settings.
  2. 2. Precision CNC machined hard 7075 series Aluminum.
  3. 3. 8 pcs total includes 4 middle bushings, 2 thin, 2 thick offset bushings.
  4. 4. Weight 0.7g per set of 4 pcs, saves 1.3 g compared to steel.
  5. 5. Schelle mini snap case included.
  6. 6. Fits Team Associated B5, B5M, B5M Factory Lite, T5M, SC5M.

Kurt "Coach" Wenger Axle Height Tuning Tips:

Axles Up: (Thin on top/ Thick on bottom) Max Steering and Corner Speed. Sometimes hard to drive.

Axles Middle: (Middle bushing both sides) Standard, Neutral Feeling.

Axles Down: (Thick on top/Thin on bottom) Easy to drive, Reduced entry steering, stable in bumps.

--------------------------------------------------------------------------

B5M Offset V2 Topshaft Set - SCH1099

The Schelle Offset V2 Topshaft Set shifts the motor weight closer to car centerline on your B5M, Factory Lite, T5M, or SC5M. The set utilizes a 3mm extended hard-anodized aluminum topshaft, spacer tube, and 3mm carbon fiber motorplate spacer to shift the motorplate and slipper unit in the car.

Features:

  1. Shift weight off of the motor side to balance your vehicle. Lightweight Nova slipper, motorplate recommended.
  2. More stability and symmetric turning forces as the motor is closer to center.
  3. Long +3mm Hard-Anodized Aluminum Topshaft and spacer tube.
  4. 3mm Carbon Fiber motor plate spacer.
  5. Longer M3x12mm motorplate mount screws included.
  6. Fits any V2 3-gear or 4-gear gearbox on a B5M Factory Lite, T5M, or SC5M. Original B5M kits require the updated V2 gearbox case (# ASC91552).

Pro tip: Dremel your gear cover for some additional clearance when the driveshaft/shock is at full compression.

--------------------------------------------------------------------------

B5M Carbon Battery Strap - SCH1088

The Schelle Associated B5M Carbon Fiber Battery Strap works as good as it looks! The innovative design allows racers to remove the front battery foams, shedding additional weight and opening up the chassis for more ESC placement options while holding the cells secure. The second creative design feature is the narrow rear tongue which allows chassis flex through the entire range of motion without contact.

B5M Carbon Battery Strap Features:

  1. 2.5 mm Carbon Fiber, CNC routed and pocketed.
  2. Partially removes kit battery foams with slotted battery stop mount in front. Stainless steel screws and aluminum nuts included.
  3. Lowers weight from 14g to 7g by changing from the kit plastic battery strap and foam.
  4. Extra clearance for center mounting the ESC in front of the battery.
  5. Wide stance holds batteries secure and pocketed upper ensures you'll never install it upside down and scuff the carbon on top.
  6. Narrow rear tongue allows for chassis flex through full range of motion without hitting.
  7. Schelle mini decal included.
  8. Fits B5M and T5M.

Note: The machined carbon fiber pockets are light gray from the factory. To get the darker look, wipe some WD-40 on the exposed carbon surface. The oil will soak into the machined pocket areas and darken the surface.

--------------------------------------------------------------------------

B5 Aluminum Rear Hubs - SCH1093

Schelle is excited to introduce a new 1/10th 2-piece hub concept with the new B5 Aluminum Hubs. The 2-piece design with replaceable upper increases adjustment and durability. The upper cap design can space away from the main hub with ballstud shims, allowing racers fine “in-between” adjustments for the rear upper link. True to the kit geometry, the zero degree toe aluminum hubs are a symmetric design with shared parts left and right. The upper cap design reduces leverage on the outer ballstud, as well as increasing shock clearance for the turnbuckle.

Features:

  1. 2-piece design with replaceable upper increases adjustment and durability.
  2. Shim adjustable upper link for small "in-between" hole locations.
  3. True Geometry, matches kit parts.
  4. Slop-Free. Plastic bearing inserts and hingepin set screws included.
  5. Symmetric design, same hub spares left and right.
  6. Reduced leverage to break ballstuds.
  7. Increased shock spring clearance for rear turnbuckles.
  8. 0 degree toe, Hubs available in Black or Blue Anodize. Caps are black anodize.
  9. Fits B5, B5M, B5M Factory Lite, T5M, SC5M.

--------------------------------------------------------------------------

B5M Aluminum Rear Ballstud Mount - SCH1082

**Update Rev-2 Parts in stock with +1mm upper (laser etched +1mm and -2mm). No more need to run the pivot flipped with 3mm of ballstud washers to run the most common setting**

The Schelle B5M Aluminum Rear Ballstud Mount is a must-have to replace the kit plastic part on a B5M. Impeccably designed and precision machined, the lightweight ballstud mount adds durability in addition to increased tuning options. Along with standard kit width mount holes (middle hole on the Schelle part) there are option close spacing inner and outer holes which give added fine tuning for the upper links. Also available in blue anodized version to match Factory Team parts.

B5M Aluminum Rear Ballstud Mount Features:

  1. Increased durability and new tuning adjustments at only 5.7g total weight.
  2. Added inner and outer tuning holes with close spacing for fine adjustments.
  3. New Rev-2 has upper side raised +1mm for the kit "standard" location and lower side lowered -2mm for a optional "flipped" installation.
  4. Precision CNC machined, black anodized, and machined with silver edges for a premium look and fit.
  5. Schelle mini decal included.
  6. Fits B5M and T5M.

*Schelle recommend using blue thread lock on screws when installing.

--------------------------------------------------------------------------

B5M Aluminum C Mount - SCH1200

The Schelle B5M Aluminum C Mount is a must-have to replace the kit plastic part on a B5M. Impeccably designed and precision machined, the aluminum mount adds security and additional tuning options. Use thread lock to secure the mount and it will stay securely on the chassis while racers can replace the plastic inserts to adjust toe-in and anti-squat. This C Mount looks great with a machined silver edge, and is a great compliment to the existing Schelle Aluminum "D" Mount.

B5M Aluminum Rear Ballstud Mount Features:

  1. Increased durability at only 5g total weight.
  2. Precision CNC machined, black anodized, and machined with silver edges for a premium look and fit.
  3. Adjust toe-in and anti-squat by changing plastic inserts instead of removing the "C" mount off of the chassis.
  4. Schelle snap case and mini decal included. Save the snap case to hold your spare inserts!
  5. Compatible with all standard width arm mount systems, will not work with +4mm wide pin systems.
  6. Fits B5M, T5M, SC5M. ASC91385 toe inserts required.

*Schelle recommend using blue thread lock on screws when installing.

--------------------------------------------------------------------------

B5M Steel C Mount - SCH1202

The Schelle B5M Steel C Mount adds weight where you need it down low, and directly in front of the rear axle. Specifically designed to plant the rear end, the Steel C is perfect for 3-Gear customers looking for more confidence in their ride.The added 15 grams give helps the car rotate through the turns and lets you put down the power on exit.Use thread lock to secure the mount and it will stay securely on the chassis while racers can replace the plastic inserts to adjust toe-in and anti-squat.This C Mount looks great with a stealthy black coating, and is a great compliment to the existing Schelle Aluminum "D" Mount.

B5M Steel C Mount Features:

  1. Increased durability and adding 15g total weight ahead of the rear axle (+10g heavier than aluminum)
  2. Increased rear grip for 3-Gear, helps 3-Gear car rotate in turns and accelerate straight on exit.
  3. Precision CNC machined, black coated.
  4. Adjust toe-in and anti-squat by changing plastic inserts instead of removing the "C" mount off of the chassis.
  5. Schelle snap case and mini decal included. Save the snap case to hold your spare inserts!
  6. Compatible with all standard width arm mount systems, will not work with +4mm wide pin systems.
  7. Fits B5M, T5M, SC5M.ASC91385 toe inserts required.

*Schelle recommend using blue thread lock on screws when installing.

--------------------------------------------------------------------------

B5M Arm Mount D - SCH1089

The Schelle B5M Aluminum Rear Arm Mount D replaces the kit plastic part on a B5M and T5M. The design improves durability, ground clearance, and also ease of use to disassemble the rear suspension. The added strength of aluminum allows for a minimalist design using machined Delrin (TM) pivot balls to allow for perfect suspension alignment. The compact design keeps the mount high off of the chassis bottom to avoid dragging on jumps and landings. With the addition of a rear carbon fiber cap, Schelle is planning new inner hinge pins that allow for rear-pull in dis-assembling the rear end and changing anti-squat. Also available in blue anodize.

B5M Aluminum Arm Mount D Features:

  1. Increased durability at only 4.5 g total weight.
  2. Minimalist design increases ground clearance, won't drag on the jumps, won't wear off the anodizing.
  3. Added carbon fiber rear cap for rear-pull hinge pins (coming soon, new pins req'd).
  4. Machined pivot bushings for perfect alignment and reduced bending forces on hinge pins.
  5. Precision CNC machined, black anodized, laser-etched logo and machined with silver edges for a premium look and fit. Schelle mini decal included.
  6. Pre-Assembled, screws use 1.3mm or 0.050" hex wrench.
  7. Fits B5M and T5M.

Pro-Tips for Installation:

  1. Trim/grind the lower chassis mate tab off of the rear plastic bumper, this allows the unit to slide in and out without removing the entire tower/gearbox assembly.
  2. Trim the outer ears off of the plastic rear bumper for more ground clearance (any plastic part wider than the chassis).

--------------------------------------------------------------------------

B5M Rear Pull Hinge Pins - SCH1098

The Schelle B5M Rear Pull Hinge Pins are the perfect complement to the Aluminum Arm Mount D released in early 2015. With some slight trimming to the B5M plastic rear bumper (instructions included) racers can remove the carbon fiber rear cap and remove the rear hingepins and arms without taking any screws off of the chassis bottom!

The pins are 3.5mm diameter chrome steel with a hard Titanium Nitride coating. Schelle Arm Mount D (SCH1089 or SCH1090) required. Fits all B5, B5M, B5M Factory Lite, T5M, SC5M.

Rear Pull Hinge Pin Set Features:

  1. Rear Pull Design mates with *Schelle Arm Mount D (*required).
  2. Titanium Nitride Hard Coated Steel.
  3. Replaceable bushings.
  4. Package includes 2 pin, 2 bushings, instruction, and Schelle mini decal.
  5. Fits B5M, T5M, SC5M with Schelle D Mount (blue or black).


Instructions


Source: