Team Associated B5/B5M - RDRP

- Team Associated B5/B5M - RDRP - Options -

--------------------------------------------------------------------------

B5/B5M Multi Option Front Bulkhead Aluminium Set - RDRP0251

FUNCTION & DESIGN
The RDRP B5RM/MM Multi Option Front Bulkhead Aluminium Set is made to replace the standard plastic composite bulkhead with a heavier part in order to adjust the buggy's weight distribution while adding rigidity at the same time. The bulkhead is made from high-quality 7075-T6 alloy material and it comes blue anodised and laser-etched for easy identification. Included is also an aluminium front suspension pin brace to round out the factory look and to help add further rigidity and precision. While the aluminium part is slightly heavier than the standard plastic composite part it shifts the weight distribution to the front of the vehicle in order to reduce wheelies on high-bite surfaces and the part also helps to calm down the front end on bumpy surfaces while adding steering in low-bite conditions. On top of that the included delrin bulkhead inserts allow to run 25 degree or 30 degree wishbone kick-up to further fine-tune the steering characteristics without having to swap the whole bulkhead. The bulkhead fits B5 and T5 series vehicles.

APPLICATION
The RDRP B5RM/MM Multi Option Front Bulkhead Aluminium Set is designed to replace the standard plastic bulkhead.

SPECIFICATIONS
- Material: Anodised 7075-T6 aluminium
- Suitable for: Team Associated B5 and T5 series vehicles
- Includes Aluminium Front Brace

--------------------------------------------------------------------------

B5/B5M Multi Option Front Bulkhead Brass Set - RDRP0252

FUNCTION & DESIGN
The RDRP B5RM/MM Multi Option Front Bulkhead Brass Set is made to replace the standard plastic composite bulkhead with a heavier part in order to adjust the buggy's weight distribution. The part is made from high-quality brass material and it comes laser-etched for easy identification. Included is also an aluminium front suspension pin brace to round out the factory look and to help add rigidity. While the heavy brass part shifts the weight distribution to the front of the vehicle in order to reduce wheelies on high-bite surfaces the part also helps to calm down the front end on bumpy surfaces and it can help adding steering in low-bite conditions. On top of that the included delrin bulkhead inserts allow to run 25 degree or 30 degree wishbone kick-up to further fine-tune the steering characteristics without having to swap the whole bulkhead. The bulkhead fits Team Associated B5 and T5 series vehicles.

APPLICATION
The RDRP B5RM/MM Multi Option Front Bulkhead Brass Set is designed to replace the standard plastic bulkhead.

SPECIFICATIONS
- Material: High-quality brass
- Weight: Bulkhead: 40.2g Brace: 3.5g
- Suitable for: Team Associated B5 and T5 series vehicles

--------------------------------------------------------------------------

B5/B5M Steering Plate Aluminium - RDRP0249

FUNCTION & DESIGN
The RDRP B5RM/MM Aluminium Steering plate replaces the kit's plastic steering plate with a stronger solution for added rigidity and better looks. The CNC-machined 7075-T6 aluminium part considerably strengthens the steering assembly for less slop, a more precise steering reaction and less flex, resulting in a rock solid steering feeling and more durability in the event of a crash. The RDRP B5RM/MM Aluminium Steering Plate is made for the use with B5 and T5 series kits and it comes blue anodised and laser-etched to match the remainder of our Team Associated option parts.

APPLICATION
The RDRP B5RM/MM Aluminium Steering Plate replaces the kit's plastic steering plate.

SPECIFICATIONS
- Material: Anodised 7075-T6 aluminium
- Weight: 4.0g
- Suitable for: Team Associated B5 and T5 series vehicles

--------------------------------------------------------------------------

B5/B5M Bellcrank Aluminium Set - RDRP0250

FUNCTION & DESIGN
The RDRP B5RM/MM Bellcrank Aluminium Set replaces the kit's plastic steering bellcranks with stronger parts for added rigidity and better looks. The CNC-machined 7075-T6 aluminium construction considerably strengthens the steering assembly for less slop, a more precise steering reaction and less flex, resulting in a rock solid steering feeling and more durability in the event of a crash. The RDRP B5RM/MM bellcrank aluminium set is made for the use with B5 and T5 series kits and it comes blue anodised and laser-etched to match the remainder of our Team Associated option parts.

APPLICATION
The RDRP B5RM/MM Bellcrank Aluminium Set replaces the kit's plastic steering bellcranks.

SPECIFICATIONS
- Material: Anodised 7075-T6 aluminium
- Suitable for: Team Associated B5, B5M, T5M and SC5M
- Available in black and blue color

RDRP0250-BL B5RM/MM Bellcrank Aluminium Set (blue)
RDRP0250-BK B5RM/MM Bellcrank Aluminium Set (black)

--------------------------------------------------------------------------

B5/B5M Shock Spring Cup Aluminium +5mm Off-Set Set - RDRP0246

FUNCTION & DESIGN
The B5 series aluminium spring cups in +5mm offset configuration are a direct replacement for the stock plastic cups and improve spring fitment and overall rigidity for optimised suspension performance especially on high-bite surfaces that put a lot of stress on the suspension. The parts are CNC-machined from aircraft-quality 7075-T6 aluminium, super lightweight at 1.65g per piece, they come blue anodised and laser-etched for that ultimate factory look.

APPLICATION
Designed to replace the kit's plastic shock cups with more rigid and more durable parts.

SPECIFICATIONS
- Material: blue anodised high-quality aluminium
- Weight: 1.49g each
- Fits: Team Associated B5,B5M,T5M, B44.3 and all other AE 1/10 offroad cars using the bigbore shocks

--------------------------------------------------------------------------

B5/B5M VTS Slipper Option Kit - RDRP0254

FUNCTION & DESIGN
The RDRP VTS Slipper Option Kit makes the most of the original Team Associated clutch. The 4-piece kit replaces the standard outer and inner aluminium slipper plates with vented variants for improved heat dissipation and fading-free operation. Also the centre VTS plate is replaces with a vented and hard-coated aluminium plate while the VTS slipper housing, originally a moulded composite parts, is supplied in a lightweight, blue anodised and laser-etched aluminium variant. Like the slipper plate the housing is of a vented design to not only allow for better heat dissipation but also to lower its weight. All parts are precision machined from 7075-T6 aluminium and they are a direct fit on both the B5 and B5M.

APPLICATION
Designed to replace the kit's standard parts with better performing and more durable parts.

SPECIFICATIONS
- Material: hard anodised and blue high-quality aluminium
- Fits: Team Associated B5, B5M and T5M

--------------------------------------------------------------------------

B5 Lightweight Heat Sink Motorplate - RDRP0244

FUNCTION & DESIGN
The RDRP B5 series Lightweight Heatsink Motorplate for all B5 series Team Associated vehicles such as the rear motor B5 and the mid motor B5M buggy as well as the T5M truck is a direct replacement for the somewhat boring looking standard motor plate. The motor mount plate sports an updated design with machined cooling fins that reduce the weight and improve cooling without sacrificing overall rigidity. The closed design also keeps dirt out of the pinion and main gear section allowing you to run the part in every racing condition. As usual with our Team Associated options the high quality 7075-T6 aluminium part comes blue anodised and laser etched for that ultimate look.

APPLICATION
The RDRP B5RM Lightweight Heatsink Motorplate replaces the kit's aluminium plate with a better looking and better performing part.

SPECIFICATIONS
- Material: hard anodised and blue high-quality aluminium
- Fits: Team Associated B5

--------------------------------------------------------------------------

B5M Wing Mount Set - RDRP0263

FUNCTION & DESIGN
The RDRP B5M Wing Mount Set replaces the kit's plastic wing mount with more durable and better performing parts. The mount is of a -7mm design that places the wing 7mm lower than the stock wing mount does which leads to a lower centre of gravity and improved jumping both on small, medium and large jumps. On top of that the high-quality 7075-T6 aluminium part grants a better support for the wing which leads to better aerodynamics and also improved durability in the event of a crash. And, above all, the new wing position looks WAY cooler!

APPLICATION
The RDRP B5M Wing Mount Set replaces the standard composite parts.

SPECIFICATIONS
- Material: Anodised 7075-T6 aluminium
- Suitable for: Team Associated B5M

--------------------------------------------------------------------------

B5 Wing Mount Aluminium Set - RDRP0243

FUNCTION & DESIGN
The RDRP B5 Wing Mount Aluminium Set is designed to replace the stock plastic wing mounts of the rear motor B5 buggy with a more rigid and durable solution. The parts are machined from blue anodised 7075-T6 aluminium for highest possibly rigidity and added looks and while the strong parts build a solid base even for high downforce buggy wings. Laser-etched Revolution Design logos add to the killer looks and the wing is easily mounted using body clips for swift wing changes without the need to use additional tools.

APPLICATION
The RDRP B5RM Wing Mount Aluminium replaces the stock plastic parts with a more rigid and better looking alternative.

SPECIFICATIONS
Material: Anodised 7075-T6 aluminium
Suitable for: Team Associated B5 Rear Motor