- Team Associated B5M - Avid RC - Options -


Aluminum Steering Bellcranks - AV1055

Product Overview

The AVID B5 & B5M Aluminum Steering Bellcranks are machined from billet 6061-T6 aluminum alloy, black anodized, and silver edge highlights for that premium look. Each package includes 1 left and 1 right bellcrank and 2 aluminum crush tubes for the steering rack bearings on all B5 based vehicles (e.g. B5, B5M, T5M, & SC5M).

The B5 & B5M Aluminum Steering Bellcranks are a must-have upgrade for any serious racer. These aluminum bellcranks eliminate flex in the steering system for maximum steering feel.

Tips
  • Assemble the steering rack by placing a crush tube on each side between the two bearings and for added protection it is recommended that you use blue thread lock on the BH screws going through the steering rack into the bellcranks.C8B3 5mm Carbon Fiber Shock Towers are made from 100% carbon fiber, set removes 33% of the weight from up high, and a direct stock replacement.
Details
  • Material: Billet 6061-T6.
  • Weight: 8.5g
  • Includes: Left and right bellcranks, 2 crush tubes, and 1 mini-decal.

--------------------------------------------------------------------------


12mm Hex Track Width Spacers, Carbon - AV1044

Product Overview

The Avid 12mm Hex Track Width Spacers are a great way to adjust the width on any car using 12mm hexes with 5mm axles or less without having to change out your hubs. In other words, any modern offroad or onroad vehicle (ie: AE B5, TLR SCTE, and Xray T4). Typically this will help stabilize a vehicle by increasing track width and scrub.

Details / Tips
  • Includes (6) 0.5mm and (6) 1.0mm Carbon Fiber 12mm Spacers, doodad container, and an Avid mini decal.
  • To install it is usually best to put them in your wheel first before putting on to the car. Just remember there are in there when you take them off! This is why we included an extra one in this pack because they like to float away like a snowflake.

--------------------------------------------------------------------------

Avert Design Aluminum Spring Cups - AV1017

Product Overview

Our popular Avert Aluminum Spring cups for the B5 and B44.3 offer you a true rigid surface with the added security that it won’t come off in those demanding conditions. This is accomplished by a unique angled slot design that adds another element of interference to keep the spring cup from popping off. If that wasn't enough, the fit is nice and snug on the shock eyelet to help prevent shock shafts from pulling out of the plastic shock end. The Avert spring cups add that extra security to your ride without sacrificing weight or putting a huge dent in your racing budget.

Features
  • Fits B5, B5M, B44.3. *Height equivalent to +5 Associated spring cup
  • Unique angled slot design: Avert Aluminum Spring Cups add 2 elements of safety.
  • A rigid aluminum spring cup won"t flex and spread open, slipping off of the shock end in a crash.
  • The angled slot design adds another element of interference to keep the spring cups from popping off in a crash. The spring cup must lift completely off of the eyelet for removal.
  • Tall inner perch to prevent spring from getting knocked off the spring cup in a crash.
  • Smooth surface is easy to clean. No nooks and crannys for dirt to get trapped in!
  • 1.3g each. Minimum Weight, Maximum Durability.
  • 6061-T6 Aluminum alloy, black anodized with laser etched logo.
  • Each package includes 4 spring cups and 1 AVID mini decal sheet.

--------------------------------------------------------------------------

Vented Motor Plate - AV1050

Product Overview

Take advantage of the unique design of the AVID B5 vented motor plate to improve your B5, B5M, and T5M. Associated owners will appreciate AVIDs innovative twist on the common motor plate.

Features
  • Innovative Angled vent design: The AVID design team wanted to remove as much weight as possible up high, so we created the 48 degree angled vents which cut completely through the part.
    • Removing weight and adding much-needed airflow around the motor-plate.
    • We angled the vents to keep debris out and let air in" a win-win!
    • Vents placed to remove material above the motor, yet still maintain a rigid motor plate to keep gear mesh consistent.
  • 100% milled. We avoid all the extra stress that comes from stamping parts in order to keep the motor plates flat and your gear mesh perfect.
  • Black Anodized 3mm 6061-T6 Aluminum with silver chamfered edge.
  • Each package includes 1 vented motor plate and 1 AVID mini decal sheet.
Specifications
  • Material: Billet 6061-T6
  • Weight: 13.3g
  • Fits B5, B5M, T5M & SC5M


Source: