The Build – Part 8 – Anti-Roll Bar

Part 8 will be short and simple; we’re assembling and attaching our rear anti-roll bar. Three steps and then it’s back to something else; or the next build step.

Step 98 - Build 2 anti-roll bar links, popping the pivot ball into the open ended side as shown.

Step 99 - Attach the anti-roll bar link to the suspension arm. Take your anti-roll bar and feed it into the pivot ball, securing it with the set screw. Make sure the anti-roll bar does not protrude out past the end of the ball. Attach both sides.

Step 100 - Set the anti-roll bar into the groove and secure it with the 2 2-56 screws. Do not overtigthen; you want the screws and washers to keep the anti-roll bar in place, not hinder it’s movement.

Part 9 – Assembling the shocks.