SETUP SHEET FOR THE RC10B3

Date 2-15-98 - Driver Frosty St. Clair - Track Performance Raceway, TX
FRONT SUSPENSION
Front Block Carrier (caster setting):  25 deg.
Steering Block: STD
Camber:-2.5 deg.
Steering Ackerman:  STD (top) 
ackerman.jpg (6982 bytes)
Toe-in: 0 deg.
Toe-out: 0 deg. Antiroll bar: none		 FRONT SHOCKS

1  middle 
2  inside
3  inside
FRONT SHOCKS
STD
A-arms level		 Limiters, inside 2
Limiters, outside 0		 Oil 40wt Shaft .71
Piston #1  Spring Green
Body .89
REAR SUSPENSION
Susp mounts: 3-3
Wheel Hub: STD
Rear Ride Height: dogbones level
Anti-squat: STD 3 deg.
Camber -2.5 deg.
Toe-in: 3 deg.
Toe-out: 0 deg.		 Wheel Hub Placement #2
REAR SHOCKS
1  middle
2  inside
3  outside
4  outside
REAR SHOCKS
STD 		 Limiters, inside 2
Limiters, outside 0		 Oil 30wt  Piston 3 hole piston
Spring silver Shaft 1.02
Body 1.32
Front Tires M2, bald   Foam: very firm
Rear Tires  M2, bald  Foam: very firm
Front Wheels 1 piece
Chassis  STD graphite
Radio Futaba Spd. Cntl LRP v6  Servo Futaba		 Motor MR. X Pinion 20
Spur Gear 84
Driveshafts MIP CVD's
Slipper  STD
Battery Type   2000
Placement  Middle
Track Comments: Smooth, dry, blue grooved.
Race Comments: Track is hooked up with jump sections that are important to downside.
Buggy Comments: Had a very slight push if you don't enter sweeper right on the pipe.

3/4/98