Following Masami Hirosaka and his mechanic advices:

1.2mm pistons, 500wt oil, hpi silver springs, all around
Front shock position 2nd hole from bottom
Rear shock position 3rd hole from bottom

Droop 5 in front and 4.5 in rear
0 degree toe in front
3 degree toe in rear

The roll centers were not raised..
Camber 1.5 all around
Front ride height 4mm, rear 4.3mm.......
1 mm front camberlink
.5 on rear hub carrier camberlink

Hpi 4 degree caster blocks