Front End

-0 degree arm sweep
-.5mm arm mount spacers
-2nd hole in on inner mount
-arm centered (2mm front and rear)
-stock arm spacing
-700cst oil 3 hole pistons w/xray 3.0 springs
-Locked gear diff with VBC ECS shafts
-1.5mm xray bar to run this bar you must put a .5mm shim between the bulkhead and sway bar mount
-5mm right height
-Droop 2mm above ride height
- -2* camber 1* toe out
-shock 4 holes out on tower stock on arm

Rear End-

-2 deg toe
-.5mm arm mount spacers
-camber link all the way in on the inner mount (longest hole on the inner mount) and inside on the hub with stock spacers
-stock arm mount spacing
-700 cst w/ 3 hole pistons and Xray 2.6 spring
-5.5mm ride height
-Droop 2mm above ride height
-VBC green bar
-Gear diff with 1000cst oil
- -1 3/4* camber
-2nd hole out on tower and stock on arm