The car was very balanced and fast! Very predictable and was able to drive it hard when I needed to. Anyway this is what I came up with for Tq!

Front:

Front shock tower on top / 3rd hole from inside with 1.5 shim behind shock
Front bottom shock position / outside
Front spring orange 3 hole piston with 600 cst
Front short wheelbase/ 2 .1 shims under all suspension blocks
White front sway bar
1.5 front camber
Stock camber link location

Rear:

Rear shock at top/ leaned all the way in
Rear shock at bottom/ outside
Rear spring / green with 3 hole piston with 350 cst
Red rear sway bar no rear shims under suspension blocks
Camber left rear 2, right rear -2.5 ( there was a right hand turn in the middle of track that had no grip yet and the car pushed there unless you hit brakes, I don't like brakes so this rotated the car through this section)
Camber link/ short on hub/ and 2 hole on inner link location, stock shims
Wheel base long.
2.5 rear toe
Droop 2mm over ride height all around car
If I didn't mention it that means it was stock location.

Body was Mazda speed 6 /with 2 middle holes in wing open.