Car: Scythe Red 2007 (plastic bulkheads/motor pod)

Front:

Pistons: Rayspeed RS14 (1.2mmx3mm)
Oil: Much More #450
Spring: TOP 1.4x5.5 (softer kit spring)
Inner camber link spacer: 2mm
Arm mount shims: 0.5mm F/R
Ride height: 5mm
Shock length: 63mm (one shock o-ring as bump stop)
Droop: 5 on gauge
Camber: 1 degree negative
Drive: Differential
Anti-roll bars: None

Rear:

Pistons: Rayspeed RS14
Oil: Much-More #400
Spring: TOP 1.4x6.0
Inner camber link spacer: 2mm
Arm mount shims: 0.5mm F/R
Ride height: 5.5mm
Shock length: 63mm (one shock o-ring as bump stop)
Droop: 4 on gauge
Camber: 1 degree negative
Drive: Differential
Anti-roll bars: None

Others:

Ballast: 55g next to ESC/motor plate (total weight 1505g)
Body: Protoform Mazdaspeed 6
Tyres: Much-More AT32 premount
Cells: IB4200
Motor: Integy Blue Atlas 19T (31/78), Yokomo S-world 9x2 (23/78)
ESC: Keyence Rapida Pro
Servo: Futaba S9550, Kawada B-29 servo saver
Radio: Futaba 3VC/R133F

If running a one-way, try an extra 1mm spacer under the front arm mounts to smooth it out, still a stable setup but harder to drive in traffic.