TRF Series No.289
TRF102 Chassis Kit
Item No: 42289

Get Ready for a Revolutionary Formula R/C Experience!

This hi-spec 2WD R/C formula chassis assembly kit employs a rear T-bar suspension setup with roll point ball and pitch shaft for completely independent roll and pitch control, and superior road holding. The front of the car utilizes independent kingpin coil-sprung suspension, while the screw-attached servo is secured with an aluminum mount and carbon fiber bridge. Slits on either side of the new 2.5mm-thick carbon fiber lower deck enhance its flexibility, which is maximized by the float mounting of the battery on the 2.0mm-thick upper deck. This leads to greater suspension stroke for smooth and stable handling. The motor mount allows adjustment of rear wing height.


Revolutionized T-Bar rear setup features completely independent pitch and roll movement.
Roll point ball is positioned low to maximize performance.


The battery pack is given a floating mount on the upper deck, removing rigidity from
the lower deck and allowing full exploitation of its flexibility.


The steering servo is held securely in place using an aluminum suspension mount
and carbon fiber bridge designed specifically for the TRF102.

Featured Components

- *Carbon Lower Deck (2.5mm thick)
- *Carbon Upper Deck (2mm thick)
- *Upper Brace (2.5mm thick)
- *Carbon Lower Brace (2.5mm thick)
- *Carbon Rear Bulkhead (2.0mm)
- *Aluminum Servo Mount
- *Aluminum Motor Mount
- *T-Bar
- TRF Damper
- F104 Low-Friction Suspension Ball Set (Item 54161)
- F104 Adjustable Metal Upright Set (Item 54357)
- Hi-Torque Servo Saver (Black)
- Integrated Carbon Diff Plate & Rear Shaft
- Reinforced Front Suspension Arms

*denotes parts designed specifically for the TRF102 chassis.

Specifications

- Chassis Length: 337mm
- Wheelbase: 270mm
- Carbon Double-Deck Frame
- Rear Direct Drive 2WD
- Ball Differential
- Symmetrical Steering Tie Rods
- Suspension: Kingpin Coil Spring (L/R independent) (Front), T-Bar (utilizing roll point ball and pitch shaft) (Rear)
- TRF Damper & High-Efficiency Roll Damper
- Gear Ratio = 4.00:1 (when used with kit-included 96T Spur and 24T Pinion)
- Requires Motor and Electronic Speed Controller (Sold Separately)

Separately Required Items

- Body
- Front/Rear Wings
- Motor -Tires
- Wheels
- 2-channel R/C system with ESC
- Batteries for transmitter
- Battery Pack and Charger


Source: