Had the opportunity to put some laps in with the Evo6. So far the car is very promising. Easy to drive and has got some pace.

My setup is basically stock with the exception of the following:

• Front and rear shocks in one hole on tower
• Titanium and aluminum screws
• 1XB/1B split blocks front and rear
• no spacers under front blocks
• HPI silver springs
• Muchmore 450 shock oil no rebound
• 2 degrees camber front and rear
• Droop 25mm front / 24.7 rear

There is plenty of space for whatever sized pinion you dare try. Picture below shows a 60 with lots of extra room.

Also ran the car with a 17.5. Here's a video demonstrating a few laps. Thanks for shooting the video goes to OSherman.