- Tamiya TA06 - Mike Slaughter - Carpet Setup - 08.09.2011 -

Front:

1mm under stock lower blocks
stock inner ballstud shims (stock holes)
3 hole 1.1mm pistons
45 weight Losi oil
HPI Pink springs
Gear diff with putty
2nd out from center upper shock mount, stock lower

Rear:

1.5mm under lower blocks, 3 degree rear toe with aluminum front blocks
1mm under inner ballstuds (stock holes)
3 hole 1.1mm pistons
37.5 weight Losi oil
HPI blue springs
Gear diff with 1000 weight
2nd out from center upper shock mount, stock lower

Stock width with Sweep 32s. 2 deg. camber all around 5mm ride height, 2mm over ride height droop. Stock wheelbase.

Misc: Stock plastics, chassis milled beneath motor for cooling. PF Speed 6, SXT traction compound, full rear 90%ish front.

No sway bars, but I would have them on if I had them at the time. Next Wednesday is our next carpet night and I will update then.... The car is 90% there, just needs fine tuning.

Mike Slaughter

Source: