- Team SpeedMerchant Rev4.5 - Todd Falkowski - Michiana RC Raceway - Nov 2007 -

 

Front End:
-Old-school Associated with no shims under the front*
-.020 Associated Front Springs.
-Servo laid flat.

Center Shock:
-CRC Shock with 35wt Losi oil.
-Front shock mount raised .080" (gives more on-power steering)
-Associated Copper spring*
-Pod "Droop" .030". (measured by taking a straightedge from back of pod to chassis, the .030" is the gap at the chassis & pod joint)

Rear End:
-Damper Lube is OLD Bud's Lube (Try Heavy CRC or Red Muddslide Lube)
-.021 "Blue" Speedmerchant springs- no preload. (Not sure how that compares to the whites on CRC cars)

Rest of the stuff...
-Parma Speed 8 HD body.
-Parma Magenta Front & Pink Rear tires.
-Putnam CO27 Stock Motor.
-ProMatch 4200 EP cells.
-Approx 1.60 rollout.

*I need to get a few wedge shims from Speedmerchant to give a little extra camber- fronts are "cone-shaped" from not having enough camber. Probably go back to a red center spring to tame the car down a little bit- the copper spring makes it a bit too aggressive on the corners, making the car inconsistent.

Source: