- Schumacher MI4CX - Martin Hofer - St Polten - ETS Rd3 - 11-13.02.2011 -
If you add 1mm rideheight and 1mm of droop front and rear you can use this setup as a basic carpet setup aswell!
Is there a reason you went to the 2 post steering system other than the stock center post?
More aggressive and more onpower steering.
Can I ask what difference the washers under the link washers make? I have been running my car with 1mm under the front and 0mm under the rear - what does it do adding more?
Droop for carpet - you ran 6 front and 5.2 rear so would roughly 5 and 4.2 be what you would expect to run for indoor carpet?
There's just a certain window the geometry of a car should be in. And to be in that window which is front camberlinks exactly parallel to the wishbone, rear 0.5 lower on the inside, you have to run 2/1.5 if you run the rollcenter like I did or 2.5/2 if you run standard blocks OR 2.5/1.5 if the car is a bit too edgy to drive. I ran narrow front hexes!
I pretty much run the setup VERY! similar to the setup I ran on the yokomo, as well as on Alex Stocker's HB.
There is a "basic setup" that seems to work on any car. Atleast this is what I found.
