Front

Camber link: Hole 1 with 1mm spacer
Shock on tower: Hole 3
Shock on arm: Hole 2
Front suspension block: A w/1mm under
Rear suspension block: In B w/1mm under
Droop: 4.5
Wheelbase: 2mm in front 1mm in rear
Diff height: B w/Spool

Ackerman:

middle chassis and top plate block w/forward B in wiper.
1mm under balls on wiper.
Outer balls upside down and in front hole on knuckle.

Ride height: 5.1mm
Toe: 0 deg
Camber: -1.5 per side
Sway bar: 1.6mm with 3mm sticking out

Shock:

3B piston with 500wt Kyosho oil and Tamiya blue spring.
Kit diaphram and pressure foam.
62mm overall length with 50 percent rebound.

Rear

Camber link: Hole 1 with 1mm spacer. Hole 1 on hub w/0 spacers
Shock on tower: Hole 4
Shock on arm: Hole 2
Front suspension block: Out C w/1mm under
Rear suspension block: Out D w/1mm under
Droop: 5
Wheelbase: 1mm in front 2mm in rear
Diff height: B w/aluminum diff halves
Ride height: 5.1mm
Camber: -2 per side
Sway bar: 1.5mm w/ball ends flush
Hub height:

Down.
Hubs middle on arm (1mm front and back).
Stock 0mm offset hub with 5mm hex's and .5mm wheel spacer.

Shock:

3B piston with 450wt Kyosho oil and Tamiya blue spring.
Kit diaphram and pressure foam.
61.5mm overall length with 40 percent rebound.

General

Sorex 28's with full sauce all around.
Sauce for 5 min.
Hacker 13.5 with 4.5fdr.
Protoform Mazda Speed 6 body with stock wing.
1oz of weight in rear on chassis between suspension arms.
1/4oz in front between suspension arms.