Front:

No front toe out in the blocks
2.0 mm front sway bar
25lb spring, Dk. blue Xray
600 wt. oil, 50 wt. equiv.
3.75mm spacer under camber link
3rd hole in on shock tower
inner hole on arm
4' caster
stock ackerman
1' toe out in tie rods
1mm spacers under blocks
longest camber link location on bulkhead
4mm ride height
2' camber
1mm droop over ride height

Rear:

2.5' rear toe in the blocks
no sway bar
17.5 spring, White Xray
500 wt. oil, 40-45 wt. equiv.
1.5mm spacer under camber link
2nd hole in on shock tower
inner hole on arm
1mm spacer under blocks
longest camber link location on bulkhead
4.5mm ride height
2.5-3' camber
Arms all the way back
.75 spacer behind rear hub
2mm droop over ride height

Magenta tires F/R
3/4 sauce front, full rear
Protoform DNA1 body

This is all with a box stock chassis. On anything except the highest traction this will work pretty good.