We were all pretty much running Hara's set up. I will post what we ran in mod and let ya have a look at it. I learned allot from Hara this weekend and he helped get my car pretty dialed. Just couldn't put in that killer run. My boy Billy made the mod A main running this set up also.

Front

pink springs
40wt oil (losi) no foam spacers in bladder
#3 pistons
#2 position on front tower (WE)
outside hole on front arm
1.4 front sway bar
2.0 front block
droop 5mm on blocks (change I made not sure what Hara's was at)
1.5mm shims under all front suspension blocks.
4mm ackerm
3mm spacer under front camber tie rod
arms all the way forward. (spacers in rear of arms)
1.5 of camber
5mm ride height

Rear

silver springs
40wt oil (losi) no foam spacer in bladder
#3 pistons
#1.5 position on rear tower (WE)
middle hole on old arm (outside hole on new arm)
1.2 rear sway bar
3.0 rear block
droop 5mm on blocks (change I made not sure what Hara's was at)
1.5 mm shims under all suspension blocks.
rear hub spacers 0.75 in front 2.0 in rear
2mm spacer under rear camber tie rod
arms all the way back (spacers in front of arms)
1.5 of camber
5mm ride height

I was using the Black Cyclone with all the hop up's and Billy had a WE with a 3m racing 5 cell chassis with the new arms. His car was slightly better than mine but I think it's because he's a better driver. Our laptimes were only 2 tenths off but he was more consistent. This is what Hara had us put on our cars.