My electronics were receiver on the right side with four ounces of weight around it and speedo on the left with a ounce and a half placement was right in front of the links ..

Front

 .18 1/12 associated springs
10 degree caster
3 camber
No h brace
Short ball
Trailing axles
Mid wheel base and mid width
Mid
Batteries forward
New crc center 1/12 shock copper spring 35 wt losi oil
1 mm pod droop

Rear

200mm rear axle width
100 tooth spur
15000 losi diff lube in tubes
Red springs 1.5 turns of pre load

Should of gone to inline axles and try green side springs