- Carpet Knife V3.2R -

- Team CRC Japan -

- Aichi prefecture - 13-05-2006 -

 

Front:

Tire = カワダ SH39.5 mm

Wheel = TRC yellow

Spring = Wolfe Motor Sports 0.5 mm

Camber, caster and toe = 1 time, on front and back shim and 0 degrees

Wolfe Motor Sports attachment color under king pin shim = spring, under knuckle

On 0 25mm and knuckle 5 mm, on 0.75 mm upper end

There is no rebound

Tower bar =aluminum make front end brace. It is hard 3 0 rings of the め

There is no ride height spacer

From servo mount = アソシ make original slant loading

Servo saber = カワダ, middle hole

Rear:

Tire = カワダ LH 4 1 mm

Wheel = Yokomo ブラック

Roll center - (side link high) =CRC low roll center - kit

As for ball under side spring= CRC white spring removal tension approximately 1mm

Friction grease = capital trade # 1 000

Ride height adjuster = IRS 2.5

Center shock = CRC Dura-Shock

Center shock oil = capital trade # 1 000

The same rate spring as center shock spring = CRC lead-lead

Rebound = 0

Rear tread = 172mm

Comments:

Body = perm speed 8

The car weight = 865 g

Chassis =ABP chassis(board thickness approximately 2.6mm)

Gear ratio exponential = spur 92T and pinion 24T

Motor = CheckPoint / team brood  82

Battery = DryHop / IB4200RV-1

There is no another electricity 

ESC = GM SX-12M

Servo = 3401

Receiver = 203 F

 

Translated original page

 

From