- CRC Carpet Knife V3.2 -

- Rajiten Atsugi -

- 26/2/2006 - Kanagawa -

 

Front:

Tire * diameter * wheel 
(JACO purple 42㎜ ・ eagle)

Spring
(CK3.1 kit standard survey 0.52mm rebound 0㎜)

Camber * caster * toe
(approximately 1/ white shim / 0)

Knuckle
(normal + titanium axle)

King pin shim
(on arm on 4 * knuckle under 1 * knuckle 1)

The king pin grease
(No)

Height approximately 2.5㎜

Rear:

Tire * diameter * wheel
(カワダ SH42㎜ Yokomo)

Damper * oil * spring
(CRC DURA shock / アソシ & 30th / gold)

Damper length
(69㎜ rebound 0㎜)

Friction grease
(capital trade # 3000)

Ride height adjuster
(IRS2.5mm)

Side link
(normal)

Side spring
(lead-lead)

Height chassis side approximately 2.5㎜

Comments:

Tire compound
(my tungsten inert gas ripper V2 front 1/3 it paints)

Rear tread * spacer
(173㎜)

Body
(ProTo form SPEED12B)

Battery * count * average discharge voltage
(XENON GP3700/? Second /? V)

Motor * winding several * brush spring
(XENON Ha - death can + ECHO82 / cutting brush)

Ratio (90/25), exponent (36.7)

ESC * servo * receiver (MC800Cver2 /  S9650/  c203hf)

Servo saber * pyro ball type & pyro ball interval
(キンブロー / middle hole)

Receiver power source
(No)

Original page 1  Original page 2

Original page 1 translated

 

 

Source :