Modified setup used in [2007 IIC] Las Vegas and The Holloween race [Cleveland].

Front

Small pulleys for the 1.71 ratio..

Short wheel base in front and rear..

Front shocks oil 50wt 1.1mm 2 hole piston or tamiya
Front shock spring 33 pound front spring
Front shock position on the tower... 1 Hole in
Front camber link ... Down and short
Caster 6 degree's caster
Front hinge pin height 8mm up from chassis
Front Camber -1.8 deg
Front wishbone or Arm . CF5
Shock on arm inner hole
Front track width 188mm
Ride height 4.5 mm
Droop 1.5mm above ride height

Rear:

Rear Shock oil 40 wt 3 hole 1.1 mm or tamiya
Rear Spring 19 pound.
Rear Shock position 1 hole in from top ..
Rear shock on arm is outside hole
Rear Arms are 80%CF
Rear Camber link low and short on tower with specialized rc rear hubs with 1.5mm under ball stud..
Rear Toe 2 degrees.. shim according.
Camber 3 degree
Ride height 5mm
Droop 1.5mm above ride height
Hinge pin height is 8.0mm from chassis up measure in the middle of the pin..
Top deck is a 2.9 mm thick

Tires:

Jaco Pinks all the way around cut to 56.8mm

Mike Blackstock