Front

Oil 40wt
Caster Block 3° Piston Tamiya 3
Toe-out 1° Spring 22lb AE
Camber 1.5° Diaphram STD
Ride Height 5mm Compensator None
Coupler Height (High/Low) Low Low Rebound 75%
Clamp Raised 0mm 0mm Droop 6 Wishbone Hardness std 35
Wheelbase Spacers 2 0 Roll Bar Copper Camberlink Spacers 0mm
Coupler Std Std Track Width Std Front Drive Alum Spool w/delrin outs
Coupler Shims 2mm 2mm Pulley Size 36 Tooth Hex Width narrow

Rear

Oil 40wt
Upright Toe 0° Piston Tamiya 3
Camber 1.5° Spring 22lb AE
Ride Height 5mm Diaphram STD
Clamp Toe 1mm in f Compensator None
Coupler Height (High/Low) High High Rebound 75%
Clamp Raised 0mm 0mm Droop 5
Wheelbase Spacers center center Roll Bar Copper
Coupler Std 2 Std Track Width Std Wishbone Hardness 35
Coupler Shims 1mm 0mm Pulley Size 36 Tooth Hex Width narrow

Other

Front Tyres Sorex Pre 36 Insert Stock Wheel Speedmind Temp N/A
Rear Tyres Sorex Pre 36 Insert Stock Wheel Speedmind Temp N/A
Chassis 2.4mm Pulley Size 21 T Ratio Final 4.21 Spur 101 Pinion ?
Motor Losi 13.5 stock timing Rotor STD Timing stock
Fan Standard Fan
Radio M11 Servo Futaba Low Profile ESC & Prog "Losi Xcelorin at 2 drag, timing up"
Body Protoform Speed 6 Wing Std/all the way back
Additive Tweak/buggy Grip 2 Weight

Track Conditions

Surface Asphalt
Traction High
Temp. Final Qualifying Finish

Comments

"1mm steering knuckles, ultra short wheelbase with couplers and pulleys."