Red = change from Rd2

FRONT

.022 BMI Linear Front Springs DB2101
No Oil on kingpin
3.5mm Ride Height
5' Castor blocks / teflon washer either side
Camber, set run foams flat
0' Toe
Laid Down Servo / Sanwa 141

REAR

Connected Chassis Side Wings
C12 Hot Bodies Shock / Hara Medium spring / 30wt Oil
Shock Length to give approx 1-1.5mm pod droop
Kit ball studs plus 1mm shim on motor pod
0.070 flex plates (DB3010)
Tubes in forward position / 5000wt Oil in tubes
3.5mm Ride height
172mm wide

MISC

front tyre Jaco Prism Lilac
rear tyre Jaco Prism Pink
CS Tyre Additive, Full front/rear
Cells = Middle
Black Art Audi
Nosram 10.5 on 58.5mmpr (or there abouts)
Nosram Evo esc 2-6-0-0
Orion Team SHO 4200’s

After a chat with PDW tubes moved to the front hole = Definately smoother in the corners.

0.070 flex plates installed after Jason B (UK) response in earlier post

Threw mine @ the wall @ almost full chat @ the end of the straight. Wouldn't drive straight after that . Looked under the hood to find the shock missing. Popped it back on and the stuck my 1st sub 12s lap in

Starting with the above @ the R1 UK nationals this weekend. Don't envisage much change though in basic setup. Trying another compound tyre & shell though.