- BMI Racing DB12R - JayBee - Highbite Indoor Asphalt Track - 05.10.2008 -

 

I run on is HIGH-BITE INDOOR ASPHALT which is UNSEALED.

FRONT

- .024 springs
- #4 Shurlube (red) on kingpins
- .5-1mm of front droop
- 5* Alum. caster blocks w/ spacers in rear of the blocks
- servo is angled
- 1.65" front tires (Jaco Lilacs or Dbl. pinks)
- 1/3 sauced w/Dbl pinks & 1/2 w/Lilacs
- 4.50mm of ride height

REAR

- Hot Bodies center shock (rebound @ 75%)
- 35 wt. oil
- Gold center spring
- Batteries forward
- .062-.064 side plates
- #3 Shurlube (green) in damper tubes (#4 causes the car to lift in tight 180's)
- Damper tubes in forward holes
- 1.5mm of pod droop (track is bumpy)
- 1.75" rear tires (Jaco Dbl pinks)
- Full sauce
- 4.50mm of ride height

88 Spur/43 Pinion combo w/a Speed Passion 13.5....

Car is balanced so there's NO introduction of tweek. The pod and chassis is level. Been playing with the Speed 8/ 8HD & Protoform Speed 12B.
My fastest laps w/ the 8 & 8HD has been a 9.7 every once and awhile; but yesterday tried the Speed 12B w/the optional rear wing and fastest laps are 9.6-9.7's consistently. I think I'll stick with this body for awhile.

Source: