Front:

5 degree castor blocks with shims centered on upper arm (4 degree castor)
.020 linear front springs
5000 wt. diff oil on the kingpins
4mm ride height and .5mm front droop
2 degrees camber
0 toe
servo on angled mount
2X pink front tires cut to 2.100

Rear:

Standard flex plates with no set screws installed
10,000 wt in tubes
silver (stock center spring)
35 wt. oil in shock
batteries in back position
1mm pod droop
2X pink rear tires cut to 2.100
4mm ride height

I used a C6 corvette body and i sauced the full rear tire and 1/2 the inside front. The Lilac tires shouldn't make the setup much different. I would start here and see how it goes.